W3vina.COM Free Wordpress Themes Joomla Templates Best Wordpress Themes Premium Wordpress Themes Top Best Wordpress Themes 2012

Tag Archive | "Guru"

Having String length Discrepancy, who is a string Guru? #archery

Discount Prices on Archery Supplies Right Here

Ordered some custom colored strings from 60x. 2 sets. Look great, service was fast and easy to deal with. I am having a string length discrepancy that I am sure one of the guru’s on here could put my mind at ease. Strings are for a Bear Carnage which is single cam. Online shows lengths to be:

String: 92 3/16
Cable: 33 9/16

I requested these length’s for this bow OR if these lengths were incorrect, use spec lengths for 2011 Bear Carnage. Now the ones I removed are a bit longer than spec. Heck, could be original, who knows. They measure:

String: 92 6/16 (+3/16 over spec)
Cable: 33 12/16 (+3/16 over spec)

Not concerned with those as they are older and being longer than spec is kinda expected.

When I went to install these after removing the older ones I had to crank the limbs quite a bit more to even have a chance at stringing the bow. So I went and measured all the new strings. Came up with:

String: 91 10/16 (-9/16 under spec)
Cable: 33 4/16 (-5/16 under spec)

I measured these very closely using a nail and pulling them quite tight. The new strings only have a couple twists so there is no excessive twisting going on. Probably had a little less twist than old strings.

Notes with new strings:
1. Bow gained at least 5 lbs in draw weight. Was about 66 lbs. Definately over 70 now and the limbs are not close to cranked down. Probably get at least 75+ lbs out of the bow if I turned the bolts all the way in. Limb bolts turned all in when I got it new, it was closer to 70-72. Has 60-70 lb limbs.
2. Cam is rotated identical as prior.. I have 3 of these exact model bows so easy to compare.
3. Now the string being twice as long as cable works because it run the length between cams twice so it seems geometry and timing should be ok.
4. I ordered 2 sets. Both sets measure identical
5. Axle to Axle was 32 1/8" prior. Now it is 31 13/16" I measured this and other dimensions so I knew where to set my peep sight in relation to my nocking point. Figured it would save some guess work.

I really would rather NOT send them in and all that hassle. Bit of a time pinch as I need to redo this bow and a second bow 100% done by middle next week. I have not contacted 60x yet because I just switched the strings 30 mins ago and its late. Goal was to set new strings up and peep tonight and go to shorting range and paper tune tomorrow.

So in short, turn down the poundage accordingly and just go with it or is something going to give me issues?


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Having String length Discrepancy, who is a string Guru? #archery

Need some help from a limb guru #archery

Discount Prices on Archery Supplies Right Here

As some of you may know, i’m in the process of fitting a Carbon Spyder turbo zt to fit me. I needed to know if first, XT1000 pro series limbs will work on the bow and second what the lbs would with 88 deflection on a size two cam. I’ve emailed Hoyt multiple times but to no avail. Please if someone could help me out, i’d be much obliged.


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Need some help from a limb guru #archery

Who is the Strother tuning guru?

Discount Prices on Archery Supplies Right Here

On AT, who is the Strother tuning guru and string maker?

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Who is the Strother tuning guru?

Are you a Damon Howatt Guru?

Discount Prices on Archery Supplies Right Here

Ok…So I’m trying to date an old Howatt bow, and have it down to a few years. The reason I need a Howatt Guru is that this Howett is on of his rare compound "wheel bows". It’s a Super Diablo TD Compound, that he experimented with between 1973-1975(?). I’m not sure if it can be pinpointed to a certain year, other than the range of a few years that I already know of. I thought it would be fun to try. I’ve attached some pictures. It’s near flawless (95+ point).

DH Lable.jpgDH Close up left side.jpgDH Close up right side.jpgDH front close up.jpgDH Left side.jpg

Attached Images


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – Traditional Archery

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Latest archery newsComments Off on Are you a Damon Howatt Guru?

Hoyt Cam and a Half Guru Pro’s

Discount Prices on Archery Supplies Right Here

So I purchased a 2007(maybe 2008) Hoyt Montega with cam and a half cams. This is my first experience with these cams. The bow came with a new set of SSS strings but the cams are not coming back to the wall at the same time. The bottom is hitting the wall while the top cam still has some rotation to go. Neither cam is perfectly centered with the hole in the cam(from what I have read this is how you get the cams in their optimal position. As you can tell I need some help with the most foolproof way to get this bow drawing with the cams in time.

Any help/advise would be appreciated.

Thanks


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – Bow Tuning

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Archery tips & tricksComments Off on Hoyt Cam and a Half Guru Pro’s

Heartland Archery | Winnipeg

Discount Prices on Archery Supplies Check out these low prices








Powered by WP Robot

1 or more persons associated with this website : http://archery-store.eshcarmel.org are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for blogs and websites to earn advertising fees by advertising and linking to amazon.com -- Compensation Disclaimer : Some of the links on this site will earn a commission when a person makes a purchase through our links. Every effort has been made to remain fair, accurate, and unbiased. Also see our FTC Disclaimer page.