Archery Store

So here is my concern and not sure what to do.

I switched from a Index to a thumb release a few months ago. recently shot my BH (Expandable) and it was two inches low at 30 yards to FP. Went to Dealership this morning and they made my d loop a little longer. They felt the shorter d loop was causing too much torque. So new loop went on and shot a bullet hole also through paper. Mind you first time ever for me and I give credit to Thumb release as I was punching the trigger with wrist release.

So here is my problem. Went out to range and 20 & 30 BH/FP touching. 40 yards FP/BH in the 12 ring but 1/2" apart. Shot the 50 yard target and both were 4" apart and high right one time and low right the next time. My sight goes out to 60 yards.

Should I just gang adjust the sight or move the drop away rest up slightly or down depending on the next 50 yards shot grouping?

Thanks!

I was wondering if anybody does this?

I currently shoot a 565ish grain hunting arrow with a 5 pin sight.

I was curious whether not not it would be feasible to shoot a lighter arrow (of the same exact diameter) that weighs substantially less at about 385-405ish with a sight tape for 3D and switch back and forth between arrows and sights without having to mess with anything my bow?

My train of thought behind this is that I won’t have to buy a new bow, I can shoot a lighter, flatter shooting arrow while shooting 3D. I would just use two different sights tapes but I don’t like the idea of messing with the thing in hunting scenarios, I like my 5 pin.

Any input would be appreciated!

Since it’s my lunch time I decided to watch some videos on target panic. Found BowLifeTV video and Levi says ( at 1:14) he can see crisp clear pin and target. How he can do that? I have been trying to adjust my eye for years now and it’s not happening.

So this is probably just a rookie mistake but I need someone to confirm this… was shooting gamegetters by Easton (2217) and got them tuned nicely at 28” length. Broke a few and went to my local shop to replace them and could only find Easton fall stalkers but same spine (2217) .bring them home and cut them to length and they are acting way too stiff. Is it normal for a different arrow model to act differently if they have the same shaft size?

My DL won’t change, but at the same time I know each bow is different. How can I ensure I can use the same arrows??

Any downside to cutting them a bit long?

Has anybody shot both? Able to use the sam anchor point? They look to be similar size/shape.

I’ve got a Backspin, but not sure I’m confident enough with it yet to hunt with it. Was thinking about trying the Sigma if it’s the same anchor.

Or can anyone recommend a hinge & thumb release with the same anchor?

Sent from my iPhone using Tapatalk

Do all the different tuning methods…bareshaft, broadhead, french, walkback, paper tuning, etc. all lead to the same end result?

With the news coming soon, what will happen if these 2 both shoot for the same manufacturer? Crediting levi for elites success and jesse keeping people brand loyal, the 2 under 1 roof has some major potential. And its a very real possibility! And that may not be the only members of the team. This could be pretty interesting.

Sent from my SAMSUNG-SM-G930A using Tapatalk