Archery Store

im not new here but it’s been a while since I’ve posted. I have target panic. I would say severe target panic. To the point that I can’t get my pins even on the target before I’m punching the trigger. I find myself throwing my bow up to make the arrow hit the target. I didn’t always used to be like this. I used to be a decent/good shot. Can someone please help me?

Bow is perfectly tuned. Form is very good. Bare shafts slap together with fletched shafts. Very tight groups BUT I think I am way overspined. And it shows up when I shoot broadheads. I am 4" left at 20 yds. I really don’t want to buy new heads or shafts unless I know that it will be right for my setup. Preferably I would rather just increase head weight to get proper spine. Can anyone tell me what I need for head weight to get me to the right spine?

SBXT 60# DW
27" DL
26.75" Axis n fused 340
125 grain heads

Thanx in advance

I am having alittle problem getting them tuned and need alittle advice . I have a Strother Valor and I’m trying to get my broad heads to hit . There close , they hit to the left of my FP’s about 4 " left at 40 yards 5-6 " at 60 . I tried to move the rest alittle to the right about 1/16 " or so but still about the same . Tried axis and gold tip with slicktrick , stutte T , with the same results . What can I try ?

Working with a single cam Diamond and I’m stuck.

To get to this point I’ve added a lot of twists to the cable, and taken out a lot of twist out of the string. They both are starting to look maxed out.

Limbs should be at 60# and measure real close at 59+.

Brace height should be at 7" and I have it at 7 1/16"

ATA is dead on at 32 5/8"

Draw length is set for 29 and I measured it (nock crotch to grip throat + 1 3/4) at 29 3/4"

It’s the cam that’s way off. There should be 2 1/4 timing marks above the limb and I’m looking at 4+. Is that advanced or ret*rded? I can’t get them straight, but the string comes of the cam with a noticeable kink in it.

I’d like to get the cam aligned, but taking twists out of the cable or adding them to the string will lose the max poundage. Not sure if I’m missing something obvious, if I should keep tweeking, or just leave well enough alone and see how it shoots.

So I have a bear attitude and the rubber part of my string stop is loose. I have tried to glue it back on with loctite super control gel but it only lasted about 50 shots.

The shaft is sometimes of composit/plastic and the stop is rubber.

Any recommendation on how to glue it back together?

Hi AT,

I’m getting a custom bag made for my Charger, but i do plan on changing to a Nitrum Turbo sometime next year, and i’d like this custom bag to fit the nitrum as well.

If there are any Nitrum Turbo owners out there, i’d appreciate it if you could measure the bow at it’s widest, broadest and tallest.

Thanks in advance!

I have 6 of each and they are each grouping amazing. I need to decide which will be my primary arrow that I am going to sight my sight too. I will be hunting bear, deer, elk and moose. Anyone use either of these please give your advice.

I’m looking to buy my first set of outdoor target arrows and I need help. I’ve already decided on Easton’s Carbon Ones, but I’m not sure what spine to get. I shoot an Apex 8, 27" draw length, and about 41# draw weight. Easton’s arrow chart says I should get 660s, although I wanted to check first with some more experienced archers.

Also what grain tips?

Thanks 🙂