W3vina.COM Free Wordpress Themes Joomla Templates Best Wordpress Themes Premium Wordpress Themes Top Best Wordpress Themes 2012

Tag Archive | "draw"

Jennings Buckmaster G2 draw length

Discount Prices on Archery Supplies Right Here

Hey everyone I recently purchased a used Buckmaster g2 I’m new to bow hunting so I figured buying a used bow to start out with would be the way to go however the draw length is set at 29 and I need to have it adjusted to 27 1/2 I have been told I need to replace the cam to adjust the draw length the only trouble I’m having is tracking one down any information will be helpful and greatly appreciated thank you

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Jennings Buckmaster G2 draw length

Draw Length Change on Hoyt RKT cam bow ????

Discount Prices on Archery Supplies Right Here

I am considering purchasing a Hoyt Carbon Spyder Turbo with #3 cams from a friend. He has it set at a 29" DL . I am a 27.5 DL on the Switchback I shoot now. I believe to make the Hoyt 28" all I would have to do is change the modules; correct?

Can anybody tell me the process it would take to make the adjustment?

Thanks

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Draw Length Change on Hoyt RKT cam bow ????

Draw Board Scales

Discount Prices on Archery Supplies Right Here

Any recommendations for a good spring scale?
Saw a Weston Sportsman @100lbs.
Already have winches.
My old Penn 4/0 works but the Dutton-Lainson WG2000 is better. 🙂
About $ 60 from Zoro Tools.
We hunt with fishing rods in South Florida.
Attached Images

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Draw Board Scales

Draw length question

Discount Prices on Archery Supplies Right Here

My draw length is 30.5 based on wingspan divided by 2.5 method. I’m searching for my first new bow in 14 years. Many of the bows I like max out at 30". If I add a loop for my release, would a thirty inch bow work?

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Draw length question

New bow, help with form and draw length…

Discount Prices on Archery Supplies Right Here

My new bow is an Obsession Addiction. Based on a few recommendations from another thread about my Elite…it seemed that some felt my DL may be too long at 29". So this new bow is slightly shorter at 28.5" however it feels really short. I feel like I may be bending my arm too much to be able to hit my anchor point. I’ll post up my form shot from my Elite and the one I just took of my Obsession….I appreciate any feedback.

And I know I need to move the peep up slightly. I just haven’t done it yet.

Elite…

ArcheryForm.jpg

Obsession…

Obsession Form1.jpg

Attached Images

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on New bow, help with form and draw length…

How’s the carbon overdrive proform at short draw length’s???

Discount Prices on Archery Supplies Right Here

like 26" draw? Can someone tell the pro’s and con’s to this bow? or is this a bow not suited for the short draw archer at lower poundage’s
Please share your thought’s

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on How’s the carbon overdrive proform at short draw length’s???

Hoyt vector making noise at first draw

Discount Prices on Archery Supplies Right Here

Hello, my vector makes a weird sound when I first draw it. Sounds like something sticking like the string in the cam channels. Anyone else ever had this and how do you fix it. This is my second bow that has done this.

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Hoyt vector making noise at first draw

Can’t draw bows when switching from Fingers to Mechanical at all.

Discount Prices on Archery Supplies Right Here

I’ve been practicing archery for most of my life, starting when I was, oh, I’d say ’bout five years old, when my uncle let me pick up a bow and found out I could draw it and hit a target instinctively. To say I’ve had a talent for archery is stretching it, but, I’m mostly self-taught, but, fairly proficient in the sport/art, still, even though I stopped shooting for 14 years, seeing as archery became too cost-prohibitive as I got into stronger and stronger bows. However, three years ago, I was re-introduced to archery when a friend bought me a Martin Lynx compound bow(#38-#65 draw, with a 29"), for my 19th birthday. I was hesitant with shooting a compound bow, as, I’m a die-hard Recurve and Long fan, and, I spent a good amount of my teenage years as an amateur boyer, making pretty decent bows before I would just throw, or give, away out of boredom and a lack of arrows, but, starting this year, I made a resolution to get into archery, and, since I have a hunting bow, fulfill one of my dreams of bow-hunting.
I’ve been shooting for my entire life, no matter how many times I’ve picked up a bow, always with finger-release. I do the ‘Legolas two-finger’ hold, with one above, and one below, the arrow nock, and, I’ve never had problems until this bow. I just had to adapt to a 3-finger under approach, and re-learn how to anchor and suddenly I went from shooting ones and fives, to shooting tens and twenties on ends of about 4-5 arrows(I use my own targets; in a nutshell, I went from 8" groups down to about the size of a baseball) at my practice distance of 20 yards. However, the different feel of the string from the compound versus a more ‘traditional’ bow brought to my attention that I have old nerve damage in my fingers, so, I recently bought a release. I do mean recently…I am writing this post not even 3 hours after purchasing the release, because I have absolutely no idea what to do.

My Martin bow is set down to roughly #45, seeing as anything higher than 50 and I’m overbowed due to my 14 year lapse of activity in the sport, and I am physically unable to draw my bow at all. I am not even kidding, I’ve searched and found one person who couldn’t draw on another website to his chin, but, he had a length problem. The length of my bow’s draw was just adjusted 1.5" down to support a possible decision to get a release, which I was told for my arm would be more than sufficient, almost regardless of what mechanism I purchased. So, I went out and bought a TruFire Hurricane Extreme Buckle mechanical release. Put the D-loop on no problem, made it a double turn for some added security with it(didn’t trust the minimum to hold.), nocked an arrow, plugged in, and tugged. And tugged. And tugged, wincing in pain the entire time.

I lowered the draw weight down as far as I could go, about #38, gave it another go, with the exact same result. When I switched to finger release, with my glove, I was able to draw it back, no problem at all, even up to the full #60 for my Martin, albeit highly overbowed and wobbling like crazy. Tried a similar length bow at #25 with the release, and the same excruciating pain in my shoulder appeared, and, I was unable to draw the bow back even an inch. It was as if I was trying to draw the release back, with it attached to a nail embedded in concrete. The string. Barely. Moved. What in the heck is going on here? Why can I draw like a pro with my fingers, but, suddenly, my bowstring is attached to Mjolnir(Thor’s Hammer) when I put the release on? I know it isn’t my bow, because somebody who’s been doing this a while was able to draw my bow no problem, so, I know it has to be me. I really need to know what’s going on, here, and how to fix it, because this is the most discouraging thing I’ve ever experienced in my life.
For anybody offering help, please, I cannot stress enough that I am on an extremely tight budget. Suggesting I purchase a bunch of bells and whistles is useless information, I need advice that will help me deal with this problem for real, using what I’ve got. I’ve spent 200 bucks on this bow, so far, just to get to this point and start failing. This isn’t an equipment problem, it’s a user malfunction, so, how do we fix the user?

ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Can’t draw bows when switching from Fingers to Mechanical at all.

Page 4 of 9« First...23456...Last »

Powered by WP Robot

1 or more persons associated with this website : http://archery-store.eshcarmel.org are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for blogs and websites to earn advertising fees by advertising and linking to amazon.com -- Compensation Disclaimer : Some of the links on this site will earn a commission when a person makes a purchase through our links. Every effort has been made to remain fair, accurate, and unbiased. Also see our FTC Disclaimer page.