W3vina.COM Free Wordpress Themes Joomla Templates Best Wordpress Themes Premium Wordpress Themes Top Best Wordpress Themes 2012

Tag Archive | "draw"

New draw length. New cams or bow? #archery

Discount Prices on Archery Supplies Right Here

Switched from index to the Perfex R and thumb this year so my TP is controlled through my new improved shot activation thanks to AT. I’m shooting better than ever. But all of my mechanics have changed and my draw length should be longer. In my RX1 Ultra I need to move from it’s #2 cam to a #3. I assume people swap them.
Assuming I can find someone who wants to swap, is it pretty straightforward? Do I need to have access to a bunch of shims or is is a standard set? Am I better off going the proshop route? I do all my own tuning and may be due for a new string anyway. Or should I wait and buy a used rx3 ultra with the correct cam?
Thanks.

Sent from my Pixel 3 using Tapatalk


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on New draw length. New cams or bow? #archery

Cam screws and draw stops Hoyt #archery

Discount Prices on Archery Supplies Right Here

Just picked a hoyt defiant turbo up. One of the screws that you loosen to adjust the mods seems stripped same with one of the draw stops. Does anyone know where to get replacements or do I need to contact Hoyt?


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Cam screws and draw stops Hoyt #archery

High FOC Build for Short Draw, Low Draw Weight, Short Arrow length #archery

Discount Prices on Archery Supplies Right Here

Looking for some advice. This topic has probably been talked about religiously and I don’t want to beat the dead horse, but I’m struggling to find a concrete answer. Here are the specs for my bow and arrows:

Bow Specs:

– Mathews Triax
– Drawlength: 28"
– Draw weight: 61.8 lb (max)

Arrow Specs:

– Length: 26.75′
– Insert Weight: 110 grains
– Outsert Weight: 70 grains
– Broad Head Weight: 100 grains
– 3 Fletch Blazers: 18 grains
– Wrap Weight: 5 grains
– Lighted Nock Weight: 20 grains

Depending on the arrow I choose the shoot, I’ll be right around 550 grains.

My question is, with such a short arrow and low poundage, will I be okay shooting a lower spined arrow? Like a 350 spined arrow. Or should I bump up to a 300 spine or higher?

This is my first time building a high FOC arrow so any advise is welcome.

Thanks in advanced!


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on High FOC Build for Short Draw, Low Draw Weight, Short Arrow length #archery

mole skin vs. shrink tube on drop away for quiet draw #archery

Discount Prices on Archery Supplies Right Here

I currently have been using mole skin on my QAD drop away, just a single strip that goes up the front, over the arrow resting position, and down the back.
Lots of shooting, shooting/hunting in the rain, etc. has it wear down or start coming apart pretty fast. It is getting old having to reapply it and re-tune again.
I’ve tried drawing an arrow back without anything on the rest and it isn’t acceptable for a quiet draw for hunting.
I’ve read that some are using shrink tube on their drop aways with success and several have said they’ll never use anything else. I’d like to hear from the folks that are using it, if it is quiet, how well it holds up, and how they apply it. On the applying it part, I’m having trouble envisioning how it would go on over the forks? Do you just use shrink wrap that is big enough to fit over the forks and it will still shrink down small enough? Arrow will position in the same spot every time? Trimming required?
Any other suggestions on something else that works and doesn’t require frequent reapplying or depend on glue to put on are welcome. TIA!


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – Bowhunting and Bowhunter Showcases

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on mole skin vs. shrink tube on drop away for quiet draw #archery

RX1 draw stops question #archery

Discount Prices on Archery Supplies Right Here

So I opened my now case and there was a draw stop laying there.
I have 2 stops on the bottom cam still in place on "E" position.
I put the draw stop I found in the case on the top cam in E position. My question is there supposed to be 2 on top or just 1?? And which side of the cam does it go on?

Sent from my SM-G950U using Tapatalk


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – Bowhunting and Bowhunter Showcases

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on RX1 draw stops question #archery

Let’s talk stabilization for short ATA and 30″ draw? #archery

Discount Prices on Archery Supplies Right Here

So who remembers when Cobra had little 4"-6" heavy stabilizers and Easton had the skinner longer stabilizers?????

Anyway back to this.

With shorter 32" ATA and 30" draw minimizing pin float. What seems to be the best for you without back bars? This will be straight up hunting rig.

I’m guessing most would recommend 8"-10" bee stinger style.

Just checking on what y’all are using.

Thanks


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – Bowhunting and Bowhunter Showcases

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Let’s talk stabilization for short ATA and 30″ draw? #archery

draw length question #archery

Discount Prices on Archery Supplies Right Here

say the best draw for you is 29 1/4, which is best go to 29 and untwist string/ twist cables OR go to 29 1/2 and twist string/ untwist cables ? does it make any differance on the valley? performance change ? Etc ?


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on draw length question #archery

Long draw bow #archery

Discount Prices on Archery Supplies Right Here

I’ve been looking into longer draw bows. (Something that will reach 32”) I prefer to stay in the shorter ATA’s. Halon 32-7, Kuma LD, Hoyt double XL are all I’ve really found for options. I would consider a little longer ATA if the bow is a good shooter. Anyone know of others I could look into?


ArcheryTalk Forum: Archery Target, Bowhunting, Classifieds, Chat – General Archery Discussion

Discount Prices on Archery Supplies Right Here

CLICK HERE To Find The Lowest Price

Posted in Best archery reviewsComments Off on Long draw bow #archery

Page 1 of 1012345...10...Last »

Powered by WP Robot

1 or more persons associated with this website : http://archery-store.eshcarmel.org are participants in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for blogs and websites to earn advertising fees by advertising and linking to amazon.com -- Compensation Disclaimer : Some of the links on this site will earn a commission when a person makes a purchase through our links. Every effort has been made to remain fair, accurate, and unbiased. Also see our FTC Disclaimer page.