Archery Store

Seems like my bow is shooting low the last few weeks. This is my first single pin sight and got me wondering… if I have to adjust the elevation, do I have to install a whole new sight tape? I see that the "red arrow" that points to the yardage is adjustable in small increments, but when I installed it, I left it all the way maxed out in the direction I need to move it. Any help would be appreciated.

Thanks

I have a MBG Rush with 6" dovetail. My sight is about maxed out to the left, and nearly maxed out downward. The bow was tuned by Tom DiRisio at Strictly Archery, so its not a tuning issue. He says he sees that a lot with MBG, especially because of the dovetail youre forced to slide the sight housing left pretty far to accomodate for the bracket.

has anyone else experienced that?

So i took the two Mudule screws off liek it says in my manual to rotate the mod. However there is still like a mettle nipple that does not come out that hold the module in place on the cam mark how do you lift the module off this nipple to rotate the mod with out a press because according to bowtech their is no need for a press ??

I am working on installing my new string and cable set (first time doing something like this). I am supposed to have an axle to axle of 33" and a brace height of 7", I got the A2A set at the 33" but the BH is at 7 1/4". What do I adjust to get the BH to the 7" and not adjust the A2A? This is on a 2010 High Country Iron Mace 70# 30" draw. Slaved trinary cam system.

Thank you

I bought a new Bowtech Invasion last summer and started practicing with it at about 66lbs. I wanted to get proficient with it before I went to the woods but just before that time, I got sick and had several operations. I am in better shape now but have lost a lot of strength in my back, arms and chest. I can barely pull it. Maybe four arrows and I’m done. How far can I let it down until I get the strength back?

If I need to make vertical adjustments while tuning are there any pros/cons or anything to watch for when trying to decide whether to move the rest up/down or the nock point?

I own perhaps the most unpopular bow a PSE Coyote. Putting that aside I have a question re.tiller adjustment.

I am shooting 3 fingers under and my the current set up is 55lbs@28, 7in brace hight, but my tiller with the limb bolts tight is 1/2in positive and if I switch the limbs top to bottom I get 1/2in negitive tiller.
I am currently trying to get some answers from PSE but was hoping someone here could help.
Is this normal for the Coyote? Can I loosen the limb bolts to adjust the tiller on this bow?

thanks for any help.