Fletched a gazzilion arrows over the years, mostly blazers and fusions with no problems but wanted to try the aae max 2.7" vanes. I cleaned the base of the vanes with acetone and the shaft as well. with wraps and without, They appear to be bonded but with minimal effort I can pull them off. Glue is bonded to the shaft fine but nothing on the vane?? I’ve tried the loctite control gel, gorrilla super glue, and some DAP (super glue) brand that I’ve had success with as well. Frustrated but will give another try before If someone has a trick to making these things bond? Using a bitz jig with right helical clamp. I do have some right offset dialed in..Maybe too much?